|
Product Code: ACTI-CAM-7100
RRP: A$1098.90
Our Price: A$712.00 gst inclusive
1/3" Sony Super HAD color CCD sensor.
MPEG-4 ASP compliant hardware compression.
CIF up to Full D1 resolution at 30/25 FPS.
Dual MPEG-4 video stream output via LAN and WAN (PPPoE supported) ports at the same time.
QoS enabled (L2, L3) for video streaming (UniCast/MultiCast)
0.5 lux at F1.2 (30 IRE, SAGC ON) / 0 lux under IR illumination.
Backlight Compensation, Auto Iris Control, Auto White Balance supported.
Digital time code embedded.
Built-in motion detection.
One-way audio supported
Vandal proof.
Ceiling mount.
MPEG-4 compression gives a high resolution image quality.
The CAM-7100 MPEG-4 IP Rugged Dome adopts MPEG-4 Advanced Simple Profile (ASP) compliant compression technology to produce DVD-like high resolution video. It utilizes the premium 1/3" SONY SuperHAD color CCD sensor, and has horizontal resolution of 480 TV lines. The real-time image transmission is 30 fps (720 x 480 pixels, NTSC) and 25 fps (720 x 576 pixels, PAL).
Advanced network technologies enable real-time surveillance.
With the LAN and WAN ports built-in, the CAM-7100 applies QoS (Quality of Service, IEEE 802.1Q) technology to fully utilize the network bandwidth. CAM-7100 supports automatic (or manual) frame rate control for concurrent video streams accessing at different network bandwidth.
With advanced MPEG-4 ASP compliant video compression and QoS-enabled streaming, the CAM-7100 delivers smooth analogue-video like transmission over LAN or WAN to reach true remote video surveillance goal. The CAM-7100 not only supports DDNS, but also has a built-in web server to enable authorized users to do live- viewing and adjust the camera setting via remote web browsers.
PRODUCT SPECIFICATION
Image
Device
Interline Transfer SONY Super HAD CCD
Size
1/3 inch
Effective Pixels (HxV)
811 x 508 (NTSC); 795 x 596 (PAL)
Horizontal Resolution
480 TVL
Min. scene Illumination
Color
0.5 Lux at F1.2 (30 IRE, SAGC ON)
Lens
Focal Length
3.5 ~ 8 mm
Lens Mount
Board lens
Synchronization
Sync. System
Internal / Line-lock (CAM-7102)
Functions
Motion Detection
Yes (3 windows)
Electronic Shutter
1/60 ~ 1/10,000 sec. (NTSC); 1/50 ~ 1/10,000 sec. (PAL)
Fixed Shutter
1/60, 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10,000 sec. (NTSC)
1/50, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10,000 sec. (PAL)
BLC
Auto detect ON/OFF; Histogram plus 255 area windows weight
AGC
Auto Gain 0 ~ 36 dB
White Balance
ATW (2500°K ~ 9500°K), AWB, PTL
Flickerless
1/100 sec. (NTSC); 1/120 ~ 1/100,000 (PAL)
Auto Iris Control
1/60 sec. (NTSC); 1/50 sec. (PAL)
S/N Ratio
S/N Ratio
Better than 48 dB
Video (Compression)
Compression
MPEG-4 ASP Compliant
Picture Resolution
Full D1 (720 x 480 in NTSC, 720 x 576 in PAL)
CIF (352 x 240 in NTSC, 352 x 288 in PAL)
QCIF (160 x 112 in NTSC, 176 x 144 in PAL)
Video Output
Composite Output
CVBS, 1.0Vp-p with 75 Ω loading, BNC Connector
Audio Input
Compression
8 kHz, Mono, PCM
Audio Line input
Unbalanced, 1.0 Vpp, 1Vrms, 3.5 mm Jack
Alarm Input
1, TTL, terminal block
Output
1, TTL, terminal block
External I/O
Reset Button
Factory default
LED
System status
Network
LAN Port
Ethernet(10/100 Base-T), RJ-45 Connector
WAN Port
Ethernet(10/100 Base-T), RJ-45 Connector
Protocol
TCP, UDP, IP, HTTP, DHCP, PPPoE, RTP, RTSP
Software
Web Browser
Microsoft Internet Explorer 6.0 or above
SDK
ActiveX control, C SDK
Security
Password Protection: configured by the administrator
|
|
